GamanH

                                 GamanH

Data Table for Steel Grades:GamanH
Mechanical properties of grade steel:GamanH
Chemical composition % of the ladle analysis of steel grade:GamanH

C(%)	Si(%)	Mn(%)	P(%)	S(%)	Cr(%)
0.47-0.57	2.30-3.00	11.0-13.50	Max 0.030	Max 0.030	20.5-22.0
Ni(%)	Mo(%)	Ti(%)	V(%)	W(%)	Nb(%)
Co(%)	Cu(%)	Al(%)	B(%)	0.40-0.50 N(%)	Other

Technological properties of grade steel:GamanH

Hardness and heat treatment specification of steel grade:GamanH

Annealing hardness HBS	Cold pull hardness HBS	Preheating temperature ℃	Quenching temperature ℃		Holding time min	Hardening medium	Temper temperature ℃	After tempering hardness ≥HRC
			salt-bath furnace	controlled atmosphere furnace
235	262	788	1191	1204	5～15	air cooling	522	60

Steel plate/Sheet thickness / mm	σb MPa	σs ≥/MPa	δ Samples from the standard for 50 mm (2 in)	180 ° of cold bending test
				longitudinal	horizontal
Hot-rolled/Cold rolling:5 - 150	520	415	16～18	2a	3.5a
Note: (1) listed in the table apex diameter (d), to steel thickness (a) multiples said. (2) in the ASTM A6 standard specified scope can meet any additional conditions. (3) from the standard for 50 mm (2 in). Mechanical properties of Manusteelcn. Mechanische Eigenschaften of Manusteelcn. Caracteristiques mecaniques of Manusteelcn. ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d’elasticite minimale Rm Tensile strength / Zugfestigkeit / Resistance a la traction A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Manusteelcn——China steel suppliers - Superior technology, Advanced equipment, Perfect procedure!

Steel description: Manusteelcn.

Step Shaft: steel plate/sheet,coil,round bar,flat bar,tube/pipe,Profiled forgings

Manusteelcn steel Specifications or Size:

Round bar:

Diameter : 1mm-2000mm

Square bar:

Size: 50mm * 50mm-600mm *600mm

Plate steel/flat bar:

Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm

Tube/pipe:

Size: OD: 6-219mm WT: 1-35 mm.

Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length: We can supply any length based on the customer's requirement.

Forging/hot rolling/ extrusion of steel.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any in-perfections or based on the customer's requirement.

UTS according to SEP 1921 C/c,D/d,E/e;A388 or GB/T 6402

Excellent service for all kinds of industries, with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and Professionality.

Hot keywords of steel grade:GamanH

Contact:Daniel Zhao,

Skype:manusteelcn

MSN:manusteelcn@hotmail.com, manusteelcn@gmail.com 

Email:sales@manusteelcn.com,info@manusteelcn.com,daniel@manusteelcn.com.

Tel:+86-15390275258

Fax:+86-816-3639422

Manusteelcn

        Further reading

Use of steel

Iron and steel are used widely in the construction of roads, railways, other infrastructure, appliances, and buildings. Most large modern structures, such as stadiums and skyscrapers, bridges, and airports, are supported by a steel skeleton. Even those with a concrete structure employ steel for reinforcing. In addition, it sees widespread use in major appliances and cars. Despite growth in usage of aluminium, it is still the main material for car bodies. Steel is used in a variety of other construction materials, such as bolts, nails, and screws.

Other common applications include shipbuilding, pipeline transport, mining, offshore construction, aerospace, white goods (e.g. washing machines), heavy equipment such as bulldozers, office furniture, steel wool, tools, and armour in the form of personal vests or vehicle armour (better known as rolled homogeneous armour in this role). Steel was the metal of choice for sculptor Jim Gary and a frequent choice for sculpture by many other modern sculptors.

Typical Mechanical Properties

Related Terms of steels

1.carbon steel,2 carbon structural steel,3high-quality structural steel,4carbon tool steel,5cutting structural steel,6 alloy steel,7ordinary low alloy steel,8engineering structures steel,9mechanical structure steel,10alloy structural steel,11alloy tool steel,12high-speed tool steel,13 spring steel,14 bearing steel,15electrical silicon steel,16rail steel,17shipbuilding steel,18steel bridges,20welding rod of steel,21stainless steel,22heat-resistantsteel,23high-temperature alloys,24 precision alloy steel.                        

Usage of Steel.

Firstly, The structuralsteel，

1>The construction and engineering with the  structural steel is called  construction steel, it is used in building, bridges, ships, boilers or other engineering, it is the production of the metal structure of the steel. Such as carbon steel, low alloy steel, reinforced steel.

2>     Machinery manufacturing structural steel- steel structural parts for manufacturing machinery and equipment. For his style of steel, it  is basically a high-quality steel or high-quality steel, mainly has quality carbon structural steel, alloy structural steel, easy to cut structural steel, spring steel, bearing steel, etc.  

Secondly, the tool steel,

Generally used in the manufacture of a variety of tools, such as carbon tool steel, alloy tool steel, high speed tool steel, etc. According to the usage, it can be divided into cutting tool steel, die steel, gauge steel.

Thirdly, the special steel,

Steel with special properties, such as acid-resistant stainless steel, heat cannot afford leather steel, high resistance alloy  steel, wear-resistant steel, magnet steel, etc.

Fourthly, Professional steel，

This means the steel professional use of the various industrial sectors, such as automotive steel, farm machinery steel, aviation and steel, chemical machinery steel, boiler steel, electrical steel, welding rod steel.

By the quality of steel ,it can be divided into:

(1)Ordinary steel, more elements containing impurities in the steel, P≤ O.05%,S≤ 0.045%,such as carbon steel, low-alloy structural steel, etc.

(2)Quality steel, less elements containing impurities in the steel 0.04%,S≤ 0.04%, such as high-quality carbon structural steel, alloy structural steel, carbon tool steel and alloy tool steel, spring steel , bearing steel ,etc.

(3) High quality steel, fewer elements containing impurities in the steel ,S≤ O.03%,P ≤ 0.035%, such as alloy structural steel and tool steel. High quality steel behind the steel grade, it is usually added the symbol "A" or the Chinese character "high" in order to be recognized.

Delivery Status of steel,

1.  Hot rolled,2cold drawn (rolled),3normalizing,4annealed,5high-temperature tempering,6solution treatment.

   Reliability,Trustworthiness.Hand in hand!We work together and build a long mutual business relationship with you for the steel grade!Warmly welcome!

For more information of steel,pls click here.