P265GH

P 265 GH steel plate

Section Links : Steel for boilers and pressure vessels
Home Page: ASTM A516 | ASTM A537 | ASTM A515 | EN 100283 P275 N | EN 100282
Grades : P 265 GH | P 235 GH | P 355 GH | P 295 GH | P 265 GH | P235 GH |

Manusteelcn is P 265 GH steel supplier,we can offer High quality steel plate,and pretreatment of the advanced equipment.If you are interested in P 265 GH steel,please contact us.

P265GH is a weldable pressure vessel and boiler steel grade used by the world's industrial fabricators.
Technical Condition: EN10028-2
Steel Mark: P265GH P295GH P355GH 16Mo3 13CrMo4-5
AD2000 Certificate.
EN10028 P265GH steel Chemical analysis -% by mass* (max)

Grade	C. %	Mn.%	S.	N	Cu	Nb	Ti.	Si.	P.	AL	Cr.	Mo.	Ni	Vi
P265GH	0.20	0.80-1.40	0.015	0.012	0.30	0.020	0.03	0.40	0.025	0.020	0.30	0.08	0.30	0.02

EN10028 P265GH stee Mechanical properties

Grade	Type	Thickness mm	Yield strength Mpa(min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KVJ) (min)
						-20°	0°	+20
P265GH	Normalized	≤16 16>to≤40 40>to≤60 60>to≤100 100>to≤150 150>to≤250	265	410-530	22	27	34	40
			255	410-530	22	27	34	40
			245	410-530	22	27	34	40
			215	410-530	22	27	34	40
			200	400-530	22	27	34	40
			185	390-530	22	27	34	40

Get a quote → Check Here

Grade :	P265GH
Number:	1.0425
Standard:	EN 10028 - 2 : 2009   Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties     EN 10216 - 2 : 2002   Seamless steel tubes for pressure purposes. Non-alloy and alloy steel tubes with specified elevated temperature properties     EN 10217 - 5 : 2002   Welded steel tubes for pressure purposes. Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties     EN 10217 - 2 : 2002   Welded steel tubes for pressure purposes. Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties     EN 10253 - 2 : 2007   Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements     EN 10273 : 2007   Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Classification:	Non-alloy quality steel
Equivalent grades:	Go here

Chemical composition %   of grade   P265GH (1.0425)

C

Si

Mn

Ni

P

S

Cr

Mo

V

N

Nb

Ti

Al

Cu

-

max   0.2

max   0.4

0.8 - 1.4

max   0.3

max   0.025

max   0.015

max   0.3

max   0.08

max   0.02

max   0.012

max   0.02

max   0.03

max   0.02

max   0.3

Cr+Cu+Mo+Ni < 0.7

Mechanical properties of grade   P265GH (1.0425)

Nominal thickness (mm):	to 100	100 - 150	150 - 250
Rm - Tensile strength (MPa) (+N)	410-530	400-530	390-530

Nominal thickness (mm):	to 16	16 - 40	40 - 60	60 - 100	100 - 150	150 - 250
ReH - Minimum yield strength (MPa) (+N)	265	255	245	215	200	185

Temperature ° C	-20	0	+20
KV - Impact energy (J) transverse, (+N)	27	34	40

Temperature ° C	0	+20
KV - Impact energy (J) longitud.,	40	47

A - Min. elongation at fracture (%) (+N)	22-23

Equivalent grades of grade   P265GH (1.0425) Warning! Only for reference

USA -

Germany DIN,WNr

Japan JIS

France AFNOR

England BS

Italy UNI

Spain UNE

Sweden SS

Poland PN

Czechia CSN

Austria ONORM

Russia GOST

Inter ISO

A414E A516Gr.60 Gr.A

1.0425 HII St45.8

SG295

A42AP A42CP A42F

151-400 161-430 161Gr.400 164Gr.400 244Gr.400

Fe410-1KW Fe410KG Fe410KT P265GH

A42RCI

1430 1431

St41K

11416 11418

St41KW

16K 20K

F5 F7

Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques

ReH	Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d锟絜lasticite minimale
Rm	Tensile strength / Zugfestigkeit / Resistance a la traction
A	Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J	Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Heat treatment conditions

+A	Soft annealed
+AC	Annealed to achieve spheroidization of the carbides
+AR	As rolled
+AT	Solution annealed
+C	Cold drawn
+CR	Cold rolled
+FP	Treated to ferrite-pearlite structure and hardness range
+LC	Skin passed
+N	Normalized
+NT	Normalized and tempered
+P	Precipitation hardened
+QA	Air quenched and tempered
+QL	Liquid quenched and tempered
+QT	Quenched and tempered
+S	Treated to improve shearability
+SH	As rolled and turned
+SR	Cold drawn and stress relieved
+TH	Treated to hardness range

Chemical composition of   P265GH (1.0425). Equivalent grades of   P265GH (1.0425). Standards of   P265GH (1.0425).
Properties of   P265GH (1.0425). Hardness of   P265GH (1.0425). Strength of   P265GH (1.0425). Elongation of   P265GH (1.0425)