S275JR

S275JR Steel Plate

Standard:  EN10025-2

Steel grade: S275JR, S275J0, S275J2, S235JR, S235J0, S235J2

Classification : Non-alloy structural steel

Application : Non-alloy steel for structural purposes

This are common mild steel/carbon steel plate for structural, manufacturing plant, machinery, mining equipment and vehicles,

excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas,

port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required

chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation

shall be evaluated using tension test.

S symbol for structural steel

275 indication of the min specified yield strength for thickness of under16mm.

JR symbol 20 temperature impact test.

J0 symbol 0 temperature impact test

J2 symbol -20 temperature impact test

S275JR Chemical is max composition of product analysis:

Nominal thickness = < 40(mm) C max = 0.21 Nominal thickness = < 40 (mm) CEV max = 0.40
C	Mn	P	S	N	Cu	CEV
max 0.22	max 1.5	max 0.04	max 0.04	max 0.012	max 0.55	max 0.42

S275JR mechanical properties steel plate.

Nominal thickness (mm)	to 16	16-40	40-63	63-80	80-100	100-125
ReH - Minimum yield strength (MPa)	275	265	255	245	235	225

Nominal thickness (mm)	3 - 100	100 - 125
Rm - Tensile strength (MPa)	410 - 560	400 - 540

Nominal thickness (mm)	3 - 40	40 - 63	63 - 100	100 - 125
A - Minimum elongation Lo = 5,65√ So (%)	23	22	21	19

Temperature	-20	0	20
Notch impact test. Min. absorbed energy	27	27	27

The min impact energy is longitudinal energy

S275JR, S275J0 and S275J2 EN10025-2 standard min thickness 5mm up to max thickness 390mm.

We can exclusively produce steel plate thickness 5mm X width 2000mm X your choice of length.