SAE 3215
We can produce SAE 3215 stainless steel round rods, SAE 3215 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control SAE 3215 chemical composition and SAE 3215 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
SAE 3215
Data Table for:Products: Carbon steel:SAE 3215
SAE 3215 properties and heat treatment forged piece, Including SAE 3215 application and specifications, We have all specifications，Including SAE 3215 steel plate, SAE 3215 sheet, SAE 3215 square steel, SAE 3215 flat bar,SAE 3215 round bar,SAE 3215 forgings, we can own production and sales.
Data Table for:Products: Carbon steel:SAE 3215
SAE 3215 properties and heat treatment forged piece, Including SAE 3215 application and specifications, We have all specifications，Including SAE 3215 steel plate, SAE 3215 sheet, SAE 3215 square steel, SAE 3215 flat bar,SAE 3215 round bar,SAE 3215 forgings, we can own production and sales.
--------------------------------------------------------------------------------
Introduction to Our Products:
Specialized high quality steel
Specialized high quality steel
We have the advantages of equipment, technologies and price
forged/hot rolling/ extrusion of steel
--------------------------------------------------------------------------------
We can produce the SAE 3215 has the following specifications:
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade SAE 3215 and Standards
C(％): 0.10～0.20
C(％): 0.10～0.20
Si(％): 0.15～0.30
Mn(％): 0.30～0.60
P(％)≤: 0.040
S(％)≤: 0.050
Cr(％): 0.90～1.25
Ni(％): 1.50～2.00
Mn(％): 0.30～0.60
P(％)≤: 0.040
S(％)≤: 0.050
Cr(％): 0.90～1.25
Ni(％): 1.50～2.00
--------------------------------------------------------------------------------
Machining performance
Download SAE 3215 the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>
--------------------------------------------------------------------------------
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
--------------------------------------------------------------------------------
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
--------------------------------------------------------------------------------
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
--------------------------------------------------------------------------------
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
--------------------------------------------------------------------------------
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
--------------------------------------------------------------------------------
Hot tags:SAE 3215 steel plate, SAE 3215 sheet, SAE 3215 square steel, SAE 3215 flat bar,SAE 3215 round bar,SAE 3215 forgings
Related hot word search:SAE 3215 round bar SAE 3215,forging SAE 3215,SAE 3215 sheet,coil SAE 3215,SAE 3215 flat bar,pipe SAE 3215,SAE 3215 Lrregular
Prev:SAE 3230
Next:SAE 3150
Next:SAE 3150
No comments:
Post a Comment